2018年12月CET6阅读模拟题2篇
第一篇
In the last two hundred years there have been great changes in the method of production of goods. This is now also true of the building industry; for mechanization has been introduced. System building can save both time and money. The principle of system building is that the building is made from a set of standard units. These are either made at the building-site or at a factory. Some designers, in fact, are standardizing the dimensions of rooms. They are made in multiples of a single fixed length, usually ten centimeters. This is called a modular (标准件的) system, and it means that manufactures can produce standardized fittings at a lower cost. The most important fact about system building is its speed. A ten-storey flat, for example, can be completed in four months.
There are several new methods of system building. One is the panel method. In this case, the construction company sometimes erects a factory on the site. The walls and floors of the building, called panels, are cast in a horizontal or vertical position. Conduits for electrical wires and sleeves for pipes are cast in the panels when they are being made. The moulds for making these castings are situated all around the building.
After the concrete panels are cast, they are allowed to set and harden for a week. Next they are lifted by a tower crane on to any section of the building. There the panels are cemented together at their joints and the floor covering is laid.
After the panels have been cemented together, the crane lifts a case into the area. It contains all the fittings to be installed, such as wash-basins, radiators and pipes. Finishing tradesmen, such as plumbers, plasterers, painters and electricians, follow behind to complete the work.
In some building developments, in some countries, whole flats with internal features like their bathrooms, bedrooms and connecting stairs, and weighing as much as twenty tons, are carried to the building-site ready-made. A giant overhead crane is used to lift them into position. In the future, this method may become more widespread.
1. The main difference between panel method and the method discussed in the last paragraph is_______.
A. the latter uses ready-made internal features
B. panels are cast in a level position
C. the former is used to build walls and floors while the latter to construct bathrooms or bedrooms
D. the former is more expensive than the latter
2. Which of these statements is TRUE of system building?
A. It employs more men. B. It is difficult and dangerous.
C. It can save both time and money. D. It means less mechanization.
3. According to the passage, the principle of system building is that_______.
A. construction methods are safer
B. buildings are made from a set of standardized units
C. similar buildings can be produced
D. all units are produced on the site
4. The usual fixed length in the modular system is_______.
A. twenty centimeters B. ten millimeters
C. fifty centimeters D. ten centimeters
5. What lifts the concrete panels onto the building?
A. Cranes. B. Man-power.
C. Pulleys. D. Hydraulic jacks.
答案
1. A 2. C 3. B 4. D 5. A
第二篇
For as long as humans have raised crops as a source of food and other products, insects have damaged them. Between 1870 and 1880, locusts ate millions of dollars' worth of crops in the Mississippi Valley. Today in the United States the cotton boll weevil damages about 300 million dollars' worth of crops each year. Additional millions are lost each year to the appetites of other plant-eating insects. Some of these are corn borers, gypsy moths, potato beetles, and Japanese beetles.
In modern times, many powerful insecticides(杀虫剂) have been used in an attempt to destroy insects that damage crops and trees. Some kinds of insecticides, when carefully used, have worked well. Yet the same insecticides have caused some unexpected problems. In one large area, an insecticide was used against Japanese beetles, which eat almost any kind of flower or leaf. Shortly afterward, the number of corn borers almost doubled. As intended, the insecticide had killed many Japanese beetles. But it had killed many of the insect enemies of the corn borer as well.
In another case, an insecticide was used in Louisiana to kill the troublesome fire ant. The insecticide did not kill many fire ants. It did kill several small animals. It also killed some insect enemies of the sugarcane borer, a much more destructive pest than the fire ants. As a result, the number of sugarcane borers increased and severely damaged the sugarcane crop.
To be sure that one insect pest will not be traded for another when an insecticide is used, scientists must perform careful experiments and do wide research. The experiments and research provide knowledge of the possible hazards an insecticide may bring to plant and animal communities. Without such knowledge, we have found that nature sometimes responds to insecticides in unexpected ways.
1. An insecticide was used in Louisiana to kill the troublesome______.
A. corn borer B. Japanese beetle
B. gypsy moth D. fire ant
2. While it is not directly stated, the article suggests that______.
A. insecticides are not dangerous to any small animals
B. insecticides do not always accomplish their purposes
C. insecticides are no longer being used to kill insects
D. insecticides do no harm to people
3. On the whole, the article tells about______.
A. the appetites of plant-eating insects B. the best way to kill boll weevils C. the dangers in using insecticides D. the best way to grow crops
4. Which statement does this article lead you to believe?
A. All changes are predictable. B. Nothing ever changes in nature.
C. Nature is not always predictable. D. Nature always serves man well.
5. Scientists perform careful experiments and do wide research because______.
A. they must learn to destroy all the insects that we need
B. they must be sure one insect pest is not traded for another
C. research keeps them from inventing new insecticide for the crops
D. research helps them find a way to kill all insects
答案
1. D 2. B 3. C 4. C 5. B
点击加载更多评论>>