华为AR28-31路由器的E1捆绑配置

来源：长理培训发布时间：2017-09-17 14:24:50

查看当前的配置
　　进入到系统配置状态（相当于CISCO设备的EN命令）
　　System View: return to User View with Ctrl+Z.
　　[quidway]sysname huawei
　　保存配置
　　The configuration will be written to the device. Are you sure?[Y/N]y Please input the file name(*.cfg)[flash:/config.cfg]:config0821.cfg Now sxdying current configuration to the device. Sxdying configuration flash:/config0821.cfg. Please wait... ...... Current configuration has been sxdyed to the device successfully.再次保存，就直接保存到之前起的文件名中。
　　The configuration will be written to the device. Are you sure?[Y/N]y Now sxdying current configuration to the device. Sxdying configuration flash:/config0821.cfg. Please wait... ....... Current configuration has been sxdyed to the device successfully.
　　[huawei]interface Ethernet 0/0
　　[huawei-Ethernet0/0]ip address 172.16.5.249 255.255.255.0
　　[huawei] （如用ctrl+z 就退回到状态下了。）
　　[huawei]user-interface vty 0 4
　　huawei-ui-vty0-4]set authentication password cipher huawei2（设置密码为huawei2)#p#
　　配置静态路由
　　华为AR28-31路由器的SNMP配置
　　见下面的第四行。
　　snmp-agent local-engineid 000007DB7F00000100002E25
　　snmp-agent sys-info version all